| HP ProCurve Switch 1400-24G
(J9078A) | HP ProCurve Switch 1400-8G
(J9077A) |
|---|
| Ports |
| 22 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Media Type: Auto-MDIX
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
2 dual-personality ports
each
port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type
10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit
Ethernet) or an open mini-GBIC slot (for use with mini-GBIC
transceivers)
| 8 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Media Type: Auto-MDIX
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
|
| Physical characteristics |
| Dimensions | 6.74(d) x 17.42(w) x 1.73(h) in. (17.12 x 44.25 x 4.39 cm) (1U height) | 4.58(d) x 7.73(w) x 1.73(h) in. (11.63 x 19.63 x 4.39 cm) (1U height) |
| Weight | 4.38 lb. (1.99 kg) | 1.19 lb. (0.54 kg) |
| Memory and processor |
| 128 KB RAM/ROM capacity; packet buffer size: 500 KB | 128 KB RAM/ROM capacity; packet buffer size: 144 KB |
| Mounting |
| Mounts in an EIA-standard 19 in. telco racks (hardware included)
| Horizontal surface mounting only
|
| Performance |
| 100 Mb Latency | < 4.7 µs (64-byte packets) | < 3.9 µs (64-byte packets) |
| 1000 Mb Latency | < 3.0 µs (64-byte packets) | < 2.1 µs (64-byte packets) |
| Throughput | up to 35.7 million pps | up to 11.9 million pps |
| Switching capacity | 48 Gbps | 16 Gbps |
| MAC address table size | 8,000 entries | 8,000 entries |
| Environment |
| Operating temperature | 32ºF to 104ºF (0ºC to 40ºC) | 32ºF to 104ºF (0ºC to 40ºC) |
| Operating relative humidity | 15% to 95% @ 104ºF (40ºC), non-condensing | 15% to 95% @ 104ºF (40ºC), non-condensing |
| Non-operating/Storage temperature | -40ºF to 158ºF (-40ºC to 70ºC) | -40ºF to 158ºF (-40ºC to 70ºC) |
| Non-operating/Storage relative humidity | 10% to 90% @ 149ºF (65ºC), non-condensing | 10% to 90% @ 149ºF (65ºC), non-condensing |
| Altitude | up to 10,000 ft. (3 km) | up to 10,000 ft. (3 km) |
| Acoustic | Power: 0 dB No Fan | Power: 0 dB No Fan |
| Electrical characteristics |
| Maximum heat dissipation | 81 BTU/hr (85 kJ/hr) | 61 BTU/hr (64 kJ/hr) |
| Voltage | 100-240 VAC | 100-127 / 200-240 VAC |
| Current | 0.7 / 0.4 A | 1.0 / 0.8 A |
| Maximum power rating | 24 W | 18 W |
| Frequency | 50 / 60 Hz | 50 / 60 Hz |
| Notes | Maximum
power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in,
and all modules populated. | Maximum power rating
and maximum heat dissipation are the worst-case theoretical maximum
numbers provided for planning the infrastructure with fully loaded PoE
(if equipped), 100% traffic, all ports plugged in, and all modules
populated.
The exact input voltage and frequency rating are
determined by the specific power adapter part number ordered. Please
select the correct power adapter country option. |
| Safety |
| CSA 22.2 No. 60950
EN 60950/IEC 60950
UL 60950
| CSA 22.2 No. 60950
EN 60950/IEC 60950
UL 60950
|
| Notes |
| Use only supported genuine ProCurve mini-GBICs with your switch.
|
|
